Jk-audio RemoteMix 3 User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
2
to RJ-11
wall jack
Tape recorder or
audio equipment
input or output,
RCA or XLR
Headphones or small
speaker, 2 jacks 1/4”
stereo or mono
Microphones,
2 XLR jacks
(mic 1 is mic/line
switchable)
Connections
RemoteMix 3 / 3.m is a professional audio mixer designed to work on
any standard analog telephone line or PBX / digital telephone system
via the handset interface. It can also connect to many cellular
telephones using a fax/modem adapter available from your cellular
telephone manufacturer. Simply plug your audio equipment into
RemoteMix 3 / 3.M and connect to a phone line. You can now put on
headphones, plug in a microphone, and you are ready to broadcast
the game or talk up a taped interview.
The RCA type jacks on RemoteMix 3 / 3.m are equivalent to the
jacks found on most home tape recorders, CD players, and receiver/
amplifiers. The balanced XLR output jack provides a high quality
connection to mixers and professional tape gear. This XLR output is
equipped with a switch to select between a telephone line / mic mix
at telephone bandwidth (200 Hz - 3400 - Hz) or a clean mic mix at full
bandwidth (80 Hz - 16 kHz). The clean mic mix contains mic 1, mic 2
and line 3 inputs. The adjustable hybrid circuit provides control over
the mix of transmit and receive audio at the output jacks.
11
be unplugged from the modular outlet until the problem has
been corrected. Repairs to this telephone equipment can only
be made by the manufacturer or its authorized agents or by
others who may be authorized by the FCC. For repair
procedures, follow the instructions outlined under the warranty
section of the manual.
4. Rights of the telephone company
If telephone equipment is causing harm to the network, the
telephone company may temporarily discontinue your telephone
service. If possible, they'll notify you before they interrupt
service. If advanced notice isn't practical, you'll be notified as
soon as possible. You'll be given the opportunity to correct the
problem, and you'll be informed of your right to file a complaint
with the FCC.
Your telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the
proper functioning of your JK Audio product. If such changes
are planned, you'll be notified by your telephone company.
FCC Part 15 Compliance
FCC Registration (continued)
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
Changes or modifications not expressly approved by JK Audio can
void the user's authority to operate the equipment.
Page view 1
1 2 3 4 5 6

Comments to this Manuals

No comments