Jk-audio Guest Module 1 User Manual download pdf (Page 4)

Guest Module 1 Remote Keypad Technical Information

Using Guest Module 1 Technical Information

RJ-45 Modular Pinout:

Pin Description

1) Ground

2) Call / Drop Control

3) Ring / OH LED

4) DTMF Output

5) +5 VDC

6) Reserved

7) Reserved

8) Reserved

Getting Connected

Connect Guest Module 1 to your

JK Audio digital hybrid using an 8

pin RJ45 modular cable. This cable

provides remote power so there is

no need for batteries or an external

power pack. We have provided a 25

foot cable to cover most installations.

If you need a custom length cable, be

sure to purchase a cable wired so that

the wire on pin 1 of each connector is

the same color (pin 1 = pin 1). Data

cables are usually wired pin 1 to pin 1,

but telephone cables are usually wired

pin 1 to pin 8.

Dimensions

Size 4.75" x 3.4" x 2" (12 x 8.6 x 5 cm)

Weight 11 oz (300 g)

Maximum cable length 50 feet.

Operating

The Call button will icker when a call

comes in. Press this button to answer

or place a call. The button will stay lit

when a call is present. When you dial

on-air, the tones go out on the line,

and do not come back mixed with

the dial tone or caller signal. Guest

Module 1 was designed exclusively for

JK Audio Digital Hybrids.

1 2 3 4 5

No comments

Jk-audio Guest Module 1 User Manual Page 4