Jk-audio BlueDriver-M3 User Manual download pdf (Page 7)

Starting Up

3

Starting Up

Connect Button

The <Connect Button> is used to

initialize connections. See pages 4-6.

This button is also used to disconnect

and turn off the BlueDriver. See page 7.

Charging

To achieve maximum battery capacity,

BlueDriver should be fully charged

before its rst use. While this battery

will normally charge in about 2 1/2

hours, please allow 4-5 hours for this

rst charge. Connect the power supply

cable to the mini USB connector on

your BlueDriver to charge the battery.

The red LED will ash to indicate that

the battery is charging, once charging

is complete, the LED will turn off.

If the battery becomes completely

discharged for an extended period of

time, the red LED will not ash until it

can begin its charge cycle. This may

take several minutes.

If the power cable is connected when

the unit is shut down, the blue LED

will stay lit. If the unit is in use, the

blue LED will indicate the current

connect mode.

Feel free to use your BlueDriver while

it is charging.

Pairing your BlueDriver

Your devices are now ready to be

paired. See Bluetooth Wireless

Technology on page 5 for pairing

instructions.

Headset

Connect

Phone

BlueDriver-M3

™

JK Audio

™

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments