Jk-audio BlueDriver-M3 User Manual download pdf (Page 10)

BlueDriver-M3 Wireless Audio Interface

6

Bluetooth Wireless Technology

3. From the powered-off state, hold

the <Connect Button> on the

BlueDriver for at least 6 seconds.

After you release it, the blue LED

should ash rapidly if the BlueDriver

is in Pairing Mode.

4. When bonding is complete, the blue

LED will ash at a rate of 2 seconds

off, 1 second on (2 secs off, 4 secs

on for HD Voice). Subsequent

connections can be made more

quickly from Idle Mode by holding

the <Connect Button> for only 2

seconds before releasing.

Pairing to a Headset

with Bluetooth Wireless

Technology

When you're rst connecting to a

new device, you should be in an

environment with no other Bluetooth

wireless technology enabled devices

within range that might also be in

Pairing Mode.

1. Set the <Headset / Phone Switch>

to the Headset position.

2. Following manufacturer’s

instructions, set your headset to

Pairing Mode.

Note: Connecting via Bluetooth

wireless technology varies with different

cell phones.

Note: If left unused in Idle or Pairing

Mode, the BlueDriver will automatically

disconnect the Bluetooth connection in

two minutes and power off.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments