Jk-audio PBXport User Manual download pdf (Page 11)

FAQs

? How do I connect a call through PBXport? Every

time I press the “Online” button, the call is discon-

nected.

! If you put the handset back in the cradle on the tele-

phone, it will depress the hook flash button on the phone

and your call will be disconnected. You should set the

handset down beside the telephone and only return it to

the cradle after your call is completed. You need to

leave the handset connected to one of the Handset

jacks on PBXport to maintain the correct impedance for

your telephone.

? The PBXport is not providing any/enough separa-

tion of Send and Caller audio.

! The A-B-C handset type selector switch must be set to

the correct position to send audio into the telephone.

Setup for this is covered on page 8. If you are connect-

ing the PBXport input and output(s) to the same device,

you must send a “mix-minus” signal into the Send jack

from your equipment. This setup is covered on page 5.

? Will PBX Port provide phantom power for my con-

denser microphone?

! No, our devices will not provide phantom power. If you

are connecting your microphone directly to PBX Port,

you should use a dynamic mic.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Jk-audio PBXport User Manual Page 11