Jk-audio PBXport User Manual download pdf (Page 3)

1. Handset Button - Press this button to use the handset as on a normal

phone call.

2. ON LED - Lit when you are online with a call using the digital hybrid.

3. Online Button - Press this button to disable the handset and activate the

PBXport for use as a digital hybrid.

4. Send LEDs - Displays the signal level going out to the telephone line.

5. Send Level - Adjusts the signal level that you are sending down the tele-

phone line, through the female XLR input.

6. Caller Level - Adjusts the level of the signal coming in from the telephone

line, going out the output jacks.

7. Send>Mix Level - Adjusts the level of local Send audio going out the Mix

output jack.

8. Mix<Caller Level - Adjusts the level of signal coming in from the tele-

phone line, going out the Mix output jack.

9. Mix Monitor jack - 1/4" stereo headphone jack containing the same mix

as the Mix output jack.

10. Mix Monitor Level - Adjusts the signal level of the 1/4" headphone jack

and the speaker terminals.

11. Front Panel Handset Jack - Connect your telephone handset to this jack

or the rear panel handset jack.

12. Front Panel Phone Jack - Connect the handset jack on your telephone

base to this jack or the rear panel phone jack using the supplied handset

jumper cable.

13. Power LED - Lit when the unit is plugged in and receiving power.

14. Receive LEDs - Displays the signal level coming from the phone line,

after the DSP.

15. Handset Type Selector Switch - Use this switch to select the correct type

of handset microphone that your telephone uses. A=Electret, B=Carbon,

C=Dynamic.

Features—Front View

1 2 3 4 5 6 7 8 9 10 11 12

14 15

1 2 3 4 5 6 7 8 ... 15 16

No comments

Jk-audio PBXport User Manual Page 3