Jk-audio BlueDriver-M3 User Manual download pdf (Page 9)

Pairing to a Cell Phone

with Bluetooth Wireless

Technology

When you're rst connecting to a

new device, you should be in an

environment with no other Bluetooth

wireless technology enabled devices

within range that might also be in

Pairing Mode.

1. Set the <Headset / Phone Switch>

to the Phone position.

2. From the powered-off state*, hold

the <Connect Button> on the

BlueDriver for at least 6 seconds.

Upon release, the blue LED should

ash rapidly as the BlueDriver

enters Pairing Mode.

3. On your phone, search for

Bluetooth Wireless Technology

5

* Holding the <Connect Button> for 5

seconds while in the powered-on state

will power off the BlueDriver.

Bluetooth wireless technology

devices. If this is the rst time you

have paired with this device, select

the option to add an audio device.

When the cell phone has found

the new device, select from the list

the device ID of 'JKBDRVM3xxxx'

where xxxx = the last four digits of

the serial number.

4. Enter the pin number as '0000'

if requested

5. When bonding is complete, the

blue LED will ash at a rate of 2

seconds off,1 second on (2 secs

off, 4 secs on for HD Voice). Once

BlueDriver-M3 has been added

to your cell phone, subsequent

connections can be made more

quickly from Idle Mode by holding

the <Connect Button> for only 2

seconds before releasing.

Bluetooth Wireless Technology

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments