Jk-audio PBXport User Manual download pdf (Page 5)

Connection—Mix-Minus Setup

Number of mics

depends on mixer

Caller to any

line level input

Aux Send to Send 1,

Mic/Line button in (Line)

Use Main Outputs,

USB or Firewire

connectors to

send audio to

recording device,

or broadcasting

equipment inputs

For whichever input channel you have the Caller connected to, turn the

corresponding Aux control to minimum (usually hard left). All other Aux

controls should be set for what you want to send to the phone line. Each

Aux Send bus is completely separate from all other outputs, so these Aux

controls will not affect what is heard on the Main outputs or on any other

Aux buses. This Aux Send bus should be pre-fader, so you can use the

fader controls to set the levels of each channel to the main output.

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Jk-audio PBXport User Manual Page 5